SupportProducts FAQI would like to use ESD protection devices. Is this all right?

OthersV-by-One HS・V-by-One・LVDS
Placing ESD protect devices for high-speed signal lines will affect waveforms.
When ESD protection devices are placed on the differential signal lines, the symmetry between P/N signal lines may be disrupted, causing Electro Magnetic Interference (EMI) and deterioration of waveforms.
To avoid this, take care to maintain the symmetry between P/N signal lines while doing your design, e.g. by using as few stubs as possible on the trace. 

You can find ESD protection devices available for high-speed signals in the following sites: 

 Murata Manufacturing Evaluation Report of EMI filter & ESD Protection Device
 Semtech Corporation  RClamp3328P etc

For details, contact the respective ESD protection device manufacturers directly.